Garmin FLEET 790 Owner's Manual - Page 7

Browse online or download pdf Owner's Manual for Marine GPS System Garmin FLEET 790. Garmin FLEET 790 27 pages.

Print Page

Select a vehicle profile.

The vehicle profile information appears, including

measurements and weight.

Select Select.

Changing Your Trailer Information

Before you can change your trailer information, you must enter a

vehicle profile for a tractor

When you change the trailer on your tractor, you can change the

trailer information in your vehicle profile without changing the

tractor information. You can switch quickly between frequently

used trailers.

Select

> Navigation > Vehicle Profile.

Select the tractor vehicle profile to use with the trailer.

Select

Select an option:

• To use a recent trailer configuration, select a trailer

configuration from the list.

• To enter a new trailer configuration, select New

Configuration, and enter the trailer information.

Editing a Vehicle Profile

You can edit a vehicle profile to change vehicle information or to

add detailed information to a new vehicle profile, such as the

vehicle identification number, trailer number, or odometer

reading. You can also rename or delete a vehicle profile.

Select

> Navigation > Vehicle Profile.

Select the vehicle profile to edit.

Select an option:

• To edit the vehicle profile information, select

a field to edit.

• To rename a vehicle profile, select

Profile.

• To delete the vehicle profile, select

Dash Cam

Aligning the Camera

Do not attempt to align the camera while driving.

You should align the dash camera each time you mount or

reposition the device.

Select Dash Cam.

Tilt the device to align the camera.

The crosshairs should point straight ahead, and the horizon

line should be centered between the top and bottom of the

screen.

TIP: If the suction cup appears in the dash cam field of view,

you should move the hinged arm toward the suction cup.

Dash Cam Controls

Some jurisdictions regulate or prohibit use of this device. It is

your responsibility to know and comply with applicable laws and

rights to privacy in jurisdictions where you plan to use this

device.

You can control the dash cam using either the dash cam app or

the notification panel.

Select

> Dash Cam, or swipe down from the top of the

screen.

Dash Cam

(Adding a Vehicle Profile, page

> Rename

> Delete.

WARNING

NOTICE

Select to save a dash cam recording.

Select to stop dash cam recording.

Select to start dash cam recording.

Select to enable audio recording.

Select to disable audio recording.

Dash Cam Recording

2).

• While the dash cam is recording, it records continuously,

overwriting the oldest, non-saved video.

• You can start and stop dash cam recording using the dash

cam controls

• If you enable the Auto Record option

page

16), the dash cam starts recording automatically when

the device receives power through the powered mount. This

is most useful when the mount is connected to an ignition

switched power source.

• When the device is removed from the mount or the mount

loses power, the dash cam stops recording automatically

after a 15 second delay.

Saving a Dash Cam Recording

You can save a portion of the recorded video to prevent it from

being overwritten by new video. By default, the device uses a

sensor to detect possible accidental collisions and saves video

footage before, during, and after the detected event. You can

also manually save video at any time.

While the dash cam is recording, select

The device saves the video footage before, during, and after

you select

Select

A message indicates the amount of video footage to be

, and select

saved.

Turning Audio Recording On or Off

Some jurisdictions may regulate or prohibit recording audio with

this device. It is your responsibility to know and comply with

applicable laws and rights to privacy in jurisdictions where you

plan to use this device.

The device can record audio using the integrated microphone

while recording video. You can turn audio recording on or off at

any time.

Select

Using the Dash Cam Gallery

You can use the dash cam gallery to view recorded dash cam

video, delete unneeded videos, and save a clip from the

unsaved video footage.

NOTE: The device stops recording video while you view videos.

Select

Select a saved video, or select Unsaved.

The video starts playing automatically.

Select an option:

• To save a clip of unsaved video footage, use the slider to

select the video segment to save, and select

The device saves the segment of video between the

orange pointers on the slider.

• To delete a video, select .

(Dash Cam Controls, page

again to extend the saved recording time (optional).

NOTICE

> Dash Cam.

> Dash Cam Gallery > OK.

3).

(Dash Cam Settings,

> Dash Cam >