Garmin GHP 10 Installation Instructions Manual - Page 10

Browse online or download pdf Installation Instructions Manual for Marine GPS System Garmin GHP 10. Garmin GHP 10 48 pages. Autopilot system, addendum
Also for Garmin GHP 10: Installation Instructions Manual (26 pages), Owner's Manual (28 pages), Declaration Of Conformity (1 pages), Reference (1 pages), Configuration Notes (14 pages)

Print Page
Garmin GHP 10 Installation Instructions Manual
2.0 L or 1.2 L Pump Hydraulic Layout on Dual-Helm Boats
S
notes:
•
2.0 L/1.2 L pump (and motor):
◦
An unbalanced cylinder requires an unbalanced valve on the pump
◦
Mount the pump horizontally if possible. Do not mount the pump vertically with the pump end (hydraulic connections) down.
•
Shadow Drive:
◦
Mount the Shadow Drive horizontally and as level as possible.
◦
Install the Shadow Drive in either the port or the starboard hydraulic steering line.
◦
Always install a length of hose between the helm and the Shadow Drive.
◦
Install the Shadow Drive between the pump and both helms.
Do not install the Shadow Drive directly to the helm.
◦
◦
Do not install the Shadow Drive between the pump and the cylinder.
◦
Do not install the Shadow Drive between the two helms.
Do not turn the system on until you bleed all the air from the helm, the Shadow Drive, the pump, and all the hydraulic lines.
See
page
34.
10
S
R
P
Upper helm
Shadow Drive
.0 L/1. L pump
(and motor)
R
P
Lower helm
Port fitting
(page
Notice
Starboard line
Return line
Port line
Starboard fitting
Balanced cylinder
21).
GHP 10 Marine Autopilot System Installation Instructions