Garmin GHP 10 Marine Autopilot System Installation Instructions Manual - Page 17

Browse online or download pdf Installation Instructions Manual for Marine GPS System Garmin GHP 10 Marine Autopilot System. Garmin GHP 10 Marine Autopilot System 48 pages. Tachometer reference
Also for Garmin GHP 10 Marine Autopilot System: Quick Start Manual (21 pages), Installation Instructions Manual (26 pages), Technical Reference (42 pages), Declaration Of Conformity (1 pages), Reference (1 pages)

Garmin GHP 10  Marine Autopilot System Installation Instructions Manual
Legacy 2.1 L Pump Hydraulic Layout on Dual-Helm Boats
S
notes:
Legacy 2.1 L pump (and motor):
Do not use the legacy 2.1 L pump on a system with an unbalanced cylinder.
Mount the pump horizontally if possible. Do not mount the pump vertically with the pump end (hydraulic connections) down.
Shadow Drive:
Mount the Shadow Drive horizontally and as level as possible.
Install the Shadow Drive in either the port or the starboard hydraulic line.
Always install a length of hose between the helm and the Shadow Drive.
Install the Shadow Drive between the pump and the helm.
Do not install the Shadow Drive directly to the helm.
Do not install the Shadow Drive between the pump and the cylinder.
Do not turn the system on until you bleed all the air from the helm, the Shadow Drive, the pump, and all the hydraulic lines.
See
page
34.
GHP 10 Marine Autopilot System Installation Instructions
R
P
Upper helm
Shadow Drive
S
R
P
Lower helm
Port fitting
Notice
Return line
Starboard line
Port line
Legacy .1 L
pump (and motor)
Starboard fitting
Balanced cylinder
17