Garmin GPSMAP Common Settings

Browse online or download pdf Common Settings for Marine GPS System Garmin GPSMAP. Garmin GPSMAP 3 pages.

Print Page

If equipped with a Garmin GpsMap 12" in a single or twin MFD (multi-function display) arrangement

and separate round gauges, the fuel level will be analog driven and displayed on the separate speed/fuel

gauge. The MFD will not give digital fuel level although fuel consumption can be monitored on the MFD if

the fuel amount is entered correctly before boating (instructions are below).

If equipped with two Garmin GpsMap 12" MFDs (multi-function displays) and no separate round

gauges, fuel level can be displayed on the MFD. All data capabilities such as maps, sonar, and vessel data

can be displayed on either screen. The screens do not have to display the same information. You can have

maps on one display and vessel information on the other.

To turn on commonly used displays:

➢ Home

➢ Press 'A/V-Gauges-Controls'

➢ Press 'vessel'

➢ Press and hold any unwanted box on the screen

➢ Press 'replace data'

o To read fuel level and vessel info on MFD(s) with no separate round gauges on

instrument panel:

▪

o Any of the data in the rectangular, digital displays can be changed by:

▪

o To display fuel used during trip:

▪

o For GPS information:

▪

o For water depth:

▪

GARMIN GPSMAP 12" – COMMON SETTINGS

(FINSEEKER ONLY)

Press 'engine'

Touch and hold the unwanted info box

Press 'replace data'

Select desired data

'Back' saves the selection

Touch and hold any of the rectangular digital displays

Press 'replace data'

Press 'trip'

Press 'trip fuel used' (to reset see below)

'Back saves the selection

Press 'GPS'

Select 'GPS heading', 'GPS position', or 'GPS speed'

'Back' saves the selection

Press 'water'

Press 'depth'

'Back' saves the selection

1 of 2

3-1-21