Garmin GPSMAP 440x - Marine GPS Receiver Installation Instructions Manual - Page 2
Browse online or download pdf Installation Instructions Manual for Marine GPS System Garmin GPSMAP 440x - Marine GPS Receiver. Garmin GPSMAP 440x - Marine GPS Receiver 30 pages. Flush mount template
Also for Garmin GPSMAP 440x - Marine GPS Receiver: Installation Instructions Manual (12 pages), Quick Reference Manual (2 pages), Declaration Of Conformity (1 pages), Template (1 pages)
Print Page
3. Install the unit in the opening (see Figure 2):
• Place the unit housing in the recently cut hole in the mounting surface.
• Slide the tension mount arms onto the hex bolts and secure them with the (4) wing nuts.
• Tighten the (4) wing nuts to secure the unit housing to the mounting surface. Be careful not to overtighten.
Assembled unit and
flush mount hardware
NOTE: If you are installing a Fishfinder 400C, the wiring harness must be connected to the boat's power supply and transducer per the installation
instructions included with the unit.
NOTE: If you are installing a GPSMAP 400 series unit, you must connect the wiring harness to the boat's power supply, GPS antenna, XM antenna
(if applicable), and transducer (if applicable) per the installation instructions included with the unit.
Tension mount brackets
Figure 2
Wing nuts