alkitronic CLD 225 Operating And Maintenance Manual - Page 3

Browse online or download pdf Operating And Maintenance Manual for Tools alkitronic CLD 225. alkitronic CLD 225 12 pages. Compact torque multiplier

Print Page

Incoming goods inspection and packaging

All parts must be visually inspected for possible

transport damage. If damage is found, notify the

carrier immediately. Returns only in original pack-

aging, by doing so damage is avoided. Therefore,

keep the packaging!

Type CLD

R = Rotatable

Type CLS

S = Rigid

Pneumatic Torque Multiplier

alkitronic® CLD

Compact torque multiplier

Torque up to approx. 7,225

ft.lbs, clockwise / anti-clock-

wise rotation, optional po-

sitioning of the control unit

thanks to rotatable mounting.

alkitronic® CLS

Compact torque multiplier

Fast rotating assembly mul-

tiplier. A secure support for

the reaction torque must be

ensured!

Torques up to approx. 1,070

ft.lbs, clockwise / anti-clock-

wise rotation.

General description

The torque can be regulated via the air supply or via the

pressure regulator of a maintenance unit. The accuracy of the

torque depends on the stability of the air supply. An air pres-

sure of 3-7 bar (43-10,000 psi) at a flow rate of approx. 10-15

l/sec (122-915 cu.in./min) guarantee optimum working even

in explosion-protected working areas.

Type CLS2

Type RCL

alkitronic® CLS2

2 gear compact torque multiplier

Torques up to approx.

35,855 ft.lbs, 2 gears (overdrive/

power gear), right / left rotation.

alkitronic® RCL

2 gear radial compact torque

multiplier

For use on protruding screw

ends such as plate heat ex-

changers. Torques up to ap-

prox. 3,390 ft.lbs, 2 gears.