Garmin GPSMAP 7212 Installation Instructions Manual - Page 17
Browse online or download pdf Installation Instructions Manual for Marine GPS System Garmin GPSMAP 7212. Garmin GPSMAP 7212 21 pages. Flush mount template
Also for Garmin GPSMAP 7212: Owner's Manual (2 pages), Technical Reference (42 pages), Declaration Of Conformity (6 pages), Supplement Manual (24 pages), Template Manual (2 pages)
Print Page
Making the Final Connections to the GPSMAP 6000/7000 Series Chartplotter
After the power cable and the GPS antenna (as well as any optional Garmin Marine Network devices, NMEA 0183 devices, NMEA 2000
connections, or video connections) are wired to the boat, connect the cables to the GPSMAP 6000/7000 series chartplotter.
Note: You must install the locking rings before connecting the cables to the chartplotter
to connect a cable to the back of a GPSMAP 6000/7000 series chartplotter:
1. Carefully press the cable into the correct port on the back of the chartplotter until it is firmly seated. Do not force the cable, because this
may damage the pins.
2. After the cable is seated, turn the locking ring clockwise until it is tight. Be careful not to overtighten the locking ring.
➊
➋
➊
➊
Garmin Marine Network connectors (×3) (Black)
➋
NMEA 2000 connector (Black)
➌
NMEA 0183 connector (Blue)
➍
Power connector (Red)
updating the Chartplotter Software
The GPSMAP 6000/7000 series chartplotter may contain a software update SD card. If so, follow the instructions provided with the card.
If a software update SD card is not included, visit
version of software on your chartplotter, select or touch
GPSMAP 6000/7000 Series Installation Instructions
➊
➋
➊
GPSMAP 6008/6208/6012/6212/7012/7212 Connectors
➊
➊
GPSMAP 7015/7215 Connectors
www.garmin.com
Configure
(page
6).
➍
➌
➏
➎
➌
➎
Video connector (Yellow)
➏
Grounding lug (unused in a typical installation)
➐
Video 2 connector (GPSMAP 7015/7215 only) (Purple)
to make sure your chartplotter software is up-to-date. To identify the
>
System
>
System Information.
➎
➍
➐
➏
17