AEG 911536410 User Manual - Page 20

Browse online or download pdf User Manual for Dishwasher AEG 911536410. AEG 911536410 28 pages.

Print Page

www.aeg.com

11. TROUBLESHOOTING

WARNING!

Improper repair of the

appliance may pose a

danger to the safety of the

user. Any repairs must be

performed by qualified

personnel.

The majority of problems that may

occur can be solved without the need

Problem and alarm code

You cannot activate the ap-

pliance.

The programme does not

start.

The appliance does not fill

with water.

The display shows

The appliance does not

drain the water.

The display shows

The anti-flood device is on.

The display shows

The appliance stops and

starts more times during op-

eration.

The programme lasts too

long.

Possible cause and solution

• Make sure that the mains plug is connected to the

mains socket.

• Make sure that there is no damaged fuse in the fuse

box.

• Make sure that the appliance door is closed.

• If the delay start is set, cancel the setting or wait for the

end of the countdown.

• The appliance recharges the resin inside the water soft-

ener. The duration of the procedure is approximately 5

minutes.

• Make sure that the water tap is open.

• Make sure that the pressure of the water supply is not

too low. For this information, contact your local water

authority.

• Make sure that the water tap is not clogged.

• Make sure that the filter in the inlet hose is not clogged.

• Make sure that the inlet hose has no kinks or bends.

• Make sure that the sink spigot is not clogged.

• Make sure that the filter in the outlet hose is not clog-

ged.

• Make sure that the interior filter system is not clogged.

• Make sure that the drain hose has no kinks or bends.

• Close the water tap and contact an Authorised Service

Centre.

• It is normal. It provides optimal cleaning results and en-

ergy savings.

• If the delay start option is set, cancel the delay setting or

wait for the end of the countdown.

• Activating options can increase the programme dura-

tion.

to contact an Authorised Service

Centre.

Refer to the below table for information

on possible problems.

With some problems, the display shows

an alarm code.