Garmin Fishfinder 300C Quick Start Manual - Page 15
Browse online or download pdf Quick Start Manual for Marine Equipment Garmin Fishfinder 300C. Garmin Fishfinder 300C 25 pages. Garmin fish finder - fishfinder user manual
Also for Garmin Fishfinder 300C: Installation Instructions Manual (8 pages), Important Safety Information (48 pages), Template (1 pages), (Spanish) Quick Start Manual (24 pages)
Print Page
•
Water Temp—sets an alarm to
sound when the transducer reports a
temperature that is 2°F (1.1°C) above
or below the specified temperature.
If you select On, press up or down
on the
ROCKER
temperature, then press SELECT.
•
Battery—sets an alarm to sound when
the battery reaches a user-determined
minimum voltage. If you select On,
press up or down on the
select the minimum battery voltage,
then press SELECT.
•
Drift—sets an alarm to sound when
the depth changes by the value
specified. If you select On, press up
or down on the
change in drift, then press SELECT.
Display
To adjust the backlight or switch
between day and night modes:
From the Home screen, select
> Display.
•
Backlight—press left or right on the
ROCKER.
Fishfinder 300C Quick Start Manual
to select the
ROCKER
ROCKER
to select the
Configure
•
Day/Night Mode—press down on the
ROCKER
bar. Press left or right on the
to switch between day and night
mode.
Sonar
To change the sonar settings:
From the Home screen, select
> Sonar. Change the sonar settings as
described starting on
to
System
To change the system settings:
From the Home screen, select
> System.
•
Beeper—sets beeps to sound during
alarms
pressed. Select Off,
On (Keys &
•
Simulator—allows you to practice with
or without a transducer.
•
NMEA Output—allows the Fishfinder
300C to transmit information to other
NMEA 0183-compatible electronic
equipment.
to highlight the Day/Night
page
6.
(page
12) or when keys are
Alarms
Alarms).
ROCKER
Configure
Configure
Only, or
3