Garmin FUSION Apollo MS-WB670 Owner's Manual - Page 36
Browse online or download pdf Owner's Manual for Marine Equipment Garmin FUSION Apollo MS-WB670. Garmin FUSION Apollo MS-WB670 44 pages. Marine hideaway stereo
Also for Garmin FUSION Apollo MS-WB670: Installation Instructions Manual (19 pages)
Print Page
Update Options
Select
, select the name of the device, and select SETTINGS > UPDATE.
Do not turn off the device or disconnect the power during a software update. Turning off the power during a
software update may cause the device to become unresponsive.
NOTE:
• You can update the device software using a USB flash drive
Drive, page
32).
• If the stereo is connected to a wireless network, you can update the software using the Fusion-Link app on a
mobile device
(Updating the Software Using the Fusion Link App, page
• The device may restart a few times when updating. This is normal.
• You can program only newer versions of software on the device.
STEREO: Updates the stereo using a valid software update file on a connected USB flash drive
Software Using a USB Flash Drive, page
NRX REMOTE: Updates an optional NRX remote connected to the NMEA 2000 port or NMEA 2000 network.
ERX REMOTE: Updates an optional Apollo ERX400 remote connected to the ETHERNET port or the Fusion
PartyBus network using a valid software update file on a connected USB flash drive
Using a USB Flash Drive, page
DAB MODULE: Updates an optional DAB module connected to the SIRIUS XM port.
FACTORY RESET: Restores all settings to the factory default values.
Additional Stereo Control Options
Connecting to a Garmin Watch
For more information about the watch, see the watch manual at www.garmin.com/manuals.
1 Following the instructions in the watch manual, install the Fusion-Link Lite
onto the watch.
2 On the stereo, select the BT source.
3 Select
> BT > CONNECTIONS > DISCOVERABLE.
The stereo remains discoverable for two minutes.
4 Bring the watch within 3 m (10 ft.) of the stereo.
NOTE: Stay 10 m (33 ft.) away from other ANT
5 Open the Fusion-Link Lite app on the watch.
The first time you open the app on the watch, the watch automatically pairs with and connects to the stereo.
If you need to pair to another stereo, in the Fusion-Link Lite app, select Settings > Pair new.
6 Control the audio playback using the Fusion-Link Lite app on the watch.
After the devices are paired, they connect automatically when they are turned on, within range, and the app is
open on the watch.
30
NOTICE
32).
32).
®
devices while pairing.
(Updating the Software Using a USB Flash
33).
(Updating the Software
™
app from the Connect IQ
Additional Stereo Control Options
(Updating the
™
store