Garmin Gladiator TR-1 Owner's Manual - Page 15

Browse online or download pdf Owner's Manual for Marine Equipment Garmin Gladiator TR-1. Garmin Gladiator TR-1 36 pages. Garmin tr-1 marine autopilot: user guide
Also for Garmin Gladiator TR-1: Installation And User Manual (4 pages), Owner's Manual (13 pages)

Print Page

If you program the [Right Chevron] and [Left Chevron] buttons for U-Turns, pressing the [Right Chevron]

To Program a U-Turn:

You must be in [Auto] or [STBY] mode before selection process can start

1. Press and hold [Setup] button.

2. While holding down the [Setup] button, select and light up [number 6 LED] [U-Turn] on the handheld.

(press and release button until the 6 LED is lit.)

3. Release the [Setup] button.

4. When you are ready to initiate a U-turn press the right or left Chevron buttons, depending on the direction

you want to make the U-turn. Example: To make a U-turn to starboard, press and release the [Right Chevron

button]. If you want this button to be a startup default, you will need to download the settings into permanent

memory, otherwise it will go back to factory defaults when the system is turned off and restarted.

5. To save the changes into permanent memory and make the selected function into a

startup default: Press and release the [Setup] button (the [Setup] LED should be lit),

and then press and hold the [Select Load] button. While holding down the [Select Load]

button, press and release the [Deckmount] On/Off button quickly, then release the GPS

[Select Load] button.

Press the 

Chevron Button

to U-Turn to Port

Change Heading with U-Turn

button will cause the boat to make a U Turn to the starboard, and the [Left

Chevron] button will cause the boat to make a U Turn to port. You can exit

the U-Turn and return to heading hold anytime by pressing either the [Right

Arrow] or [Left Arrow] button.

Left 

Press the Right

Chevron Button

to U-Turn to

Starboard