AEG F99705IM0P User Manual - Page 14

Browse online or download pdf User Manual for Dishwasher AEG F99705IM0P. AEG F99705IM0P 28 pages.

AEG F99705IM0P User Manual
14
www.aeg.com
If you use multi-tablets and the drying
performance is satisfactory, the rinse aid

9. DAILY USE

1. Open the water tap.
2. Press the on/off button to activate
the appliance.
Make sure that the appliance is in
programme selection mode.
• If the rinse aid empty message is
shown fill the rinse aid dispenser.
3. Load the baskets.
4. Add the detergent.
5. Set and start the correct programme
for the type of load and the degree
of soil.
9.1 Using the detergent
A
CAUTION!
Only use detergent
specifically designed for
dishwashers.
1. Press the release button (A) to open
the lid (C).
2. Put the detergent, in powder or
tablets, in the compartment (B).
3. If the programme has a prewash
phase, put a small quantity of
detergent on the inner part of the
appliance door.
4. Close the lid. Make sure that the lid
locks into position.
B
C
refill indication can be disabled by
setting the rinse aid level to 0.
We recommend to always
use rinse aid for better
drying performance, also in
combination with multi-
tablets containing rinsing
agent.
9.2 Setting and starting a
programme
The Auto Off function
This function decreases energy
consumption by deactivating
automatically the appliance when it is not
operating.
The function comes into operation:
• 5 minutes after the completion of the
programme.
• After 5 minutes if the programme has
not started.
Starting a programme
1. Press the on/off button to activate
the appliance.
2. Close the appliance door.
3. Select a programme. The
programme ECO is always the
default programme.
4. Select applicable options if desired.
5. Press the OK key, the programme
starts.
If the programme is applicable to the
option TimeSaver, you have to confirm
Fast or Normal.
How to delay the start of a
programme
It is not possible to set the delay start
with the MyFavourite programme.
1. Set the programme.
2. Press the Delay key.
The delay time is indicated in the upper
right corner of the display.
3. Press repeatedly the Delay key to
increase the number of hours of the