AEG FAVORIT 40630 User Instructions - Page 38

Browse online or download pdf User Instructions for Dishwasher AEG FAVORIT 40630. AEG FAVORIT 40630 44 pages. Electrolux group. user instructions dishwasher favorit 40630
Also for AEG FAVORIT 40630: User Instructions (48 pages)

Print Page

Installation and Connection Instructions

Water drain

Drain hose

The drain hose must not be kinked, crushed or entangled.

• Connecting the drain hose:

– Maximum permitted height: 1 metre.

– Minimum required height 40 cm above the lower edge of the machine.

Extension hoses

• Extension hoses are available from

AEG Service Force. The internal

diameter of the extension hoses

must be 19 mm to ensure that the

function of the appliance is not

impeded.

• Hoses may be laid a maximum of

3 metres horizontally; the maximum

permitted height for the connection

for the drain hose is then 85 cm.

Sink outlet connection

• The outlet of the drain hose (ø 19 mm) fits all commonly available

sink outlet spigot types. The outer diameter of the spigot connection

must be at least 15 mm.

• The drain hose must be fixed to the sink outlet connection using the

hose clamp supplied.

If the dishwasher is fitted at a high position

If the dishwasher is installed at a high level, and the drainhose connec-

tion is less than 30 cm from the bottom of the appliance, adapter kit ET

111099520 must be fitted. This is available from Customer Service.

Discharging into a standpipe

When discharging into a standpipe,

the upright standpipe should have a

minimum, length of 30 cm (12") from

the bottom of the elbow to the top

of the pipe (see diagram). Make sure

that it is designed in such a way that

the end of the drain hose cannot be

covered with water.