AEG FAVORIT 40850 User Information - Page 33

Browse online or download pdf User Information for Dishwasher AEG FAVORIT 40850. AEG FAVORIT 40850 40 pages. Electrolux user information dishwasher 40850
Also for AEG FAVORIT 40850: User Information (48 pages)

Print Page

Water drainage

Drain hose

The drain hose must not be kinked, crushed or entangled.

Connecting the drain hose:

– Maximum permitted height: 1 metre.

– Minimum required height: 40 cm above the bottom edge of the ap-

pliance.

Extension hoses

• Extension hoses are available from

your local Service Force Centre. To

ensure that the function of the ap-

pliance is not impeded, the internal

diameter of extension hoses must

be 19 mm.

• Extension hoses must not be laid

more than a maximum distance of

3 metres horizontally; the maxi-

mum permitted height for the con-

nection for the drain hose is then

85 cm.

Sink outlet connection

• The outlet of the drain hose (ø 19 mm) fits all commonly available

sink outlet types. The outer diameter of the sink outlet connection

must be at least 15 mm.

• The drain hose must be fixed to the sink outlet connection using the

hose clamp supplied.

Water drainage if the dishwasher is built-in at high level

If the dishwasher is installed at a high level, and the drain hose connec-

tion is less than 30 cm from the lower edge of the appliance, adapter

kit ET 111099520 must be fitted by your local Service Force Centre.

Water drainage into sink (only possible with free-standing appli-

ances)

If you wish to hang the drain hose over the edge of a sink, use a de-

tachable hose elbow. You can obtain this from AEG Service Force by re-

ferring to spare part number ET 646 069 190.

1. Fit the elbow to the drain hose.

2. Secure the drain hose so that it cannot slide off the edge of the sink.

Pass a piece of cord through the hose elbow and fix it to the wall or the

tap.