AEG FAVORIT 44060 VIL Instruction Book - Page 41

Browse online or download pdf Instruction Book for Dishwasher AEG FAVORIT 44060 VIL. AEG FAVORIT 44060 VIL 48 pages. Aeg dishwasher user manual

Print Page

Installation instructions

Water supply connections

This dishwasher may be fed with either hot (max. 60°) or cold water.

Nevertheless we advise you a cold water supply.

A hot water supply is not always efficient with very soiled crockery as

it shortens the washing programmes a lot.

For making the connection itself, the coupling nut fitted to the

machine's supply hose is designed to screw onto either a 3/4" inch

gas thread spout or to a purpose made quick-coupling tap such as

the Press-block.

The water pressure must be within the limits given in the "Technical

specifications". Your local Water Authority will advise you on the

average mains pressure in your area.

The water inlet hose must not be kinked, crushed, or entangled when

it is being connected up.

The dishwasher features fill and drain hoses which can be turned

either to the left or the right to suit the installation by means of the

locknut. The locknut must be correctly fitted to avoid water leaks.

(Attention! NOT all models of dishwashers have fill and drain hoses

provided with locknut. In this case, this kind of facility is not

possible).

If the machine is connected to new pipes or pipes which have not

been used for a long time, you should run the water for a few

minutes before connecting the inlet hose.

Do not use, for connection, old hoses which have been used in

another appliance.

The dishwasher is fitted with safety devices that prevent the wash

water returning into the drinking water system and comply with the

applicable plumbing regulations.