AEG FAVORIT 44080 I User Information - Page 8

Browse online or download pdf User Information for Dishwasher AEG FAVORIT 44080 I. AEG FAVORIT 44080 I 48 pages. Electrolux user instructions dishwasher favorit 44080 i
Also for AEG FAVORIT 44080 I: User Information (40 pages), User Manual (40 pages)

Print Page
AEG FAVORIT 44080 I User Information
Setting electronically:
1. Press the ON/OFF button.
3
If the only LED indicator illuminated is one that belongs to a pro-
gramme button, this means that this dishwashing cycle has been acti-
vated. The dishwashing cycle must be deselected:
Press function buttons 2 and 3 simultaneously for approx. 2 seconds.
The LED indicators of all the programme buttons that can be selected
light up.
2. Press function buttons 2 and 3 simultaneously and keep them pressed.
The LED indicators for function buttons 1 to 3 will flash.
3. Press function button 1.
The LED indicator for function button 1 will flash.
The multi-display will indicate the hardness setting.
4. Pressing function button 1 increases the hardness setting by 1.
(Exception: hardness setting 1 follows hardness setting 10).
5. When the hardness setting is correct, press the ON/OFF button.
The hardness setting is now saved.
If the water softener is set electronically to "1", this switches off the
control indicator for special salt.
1)
in °d
51 - 70
43 - 50
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
below 4
1) (°d) German degree, measure of the hardness of water
2) [mmol/l] millimol per litre, international unit for water hardness
3) On this setting the length of the dishwashing cycle may be slightly longer.
*) factory setting
8
Water hardness
2)
in mmol/l
Range
9,0 - 12,5
7,6 - 8,9
6,5 - 7,5
5,1 - 6,4
4,0 - 5,0
3,3 - 3,9
2,6 - 3,2
1,9 - 2,5
0,7 - 1,8
I/II
below 0.7
Adjusting the hardness
setting
Manual
IV
1
III
II
0*
I
Indication on
the multi-dis-
play
Electronic
3)
10L
10
9
8
7
6
5
4*
3
2
1
no salt
necessary
.
9L
8L
7L
6L
5L
4L
3L
2L
1L