AEG FAVORIT 44080 Vi User Information - Page 35

Browse online or download pdf User Information for Dishwasher AEG FAVORIT 44080 Vi. AEG FAVORIT 44080 Vi 48 pages. Aeg dishwasher user manual

Print Page

Installation and connection instructions

• Only transport the dishwasher in an upright position, otherwise salt

water may run out.

• Before using the dishwasher for the first time, check for any damage

caused in transport. Do not under any circumstances connect an ap-

pliance that is damaged. In the case of damage, please contact your

supplier.

• Never use the dishwasher if the mains cable, water inlet or drain hose

are damaged; or if the control panel, work top or plinth area are

damaged such that the inside of the appliance is freely accessible.

• Always plug the mains plug into a correctly installed shockproof

socket.

• Permanent connection: a permanent connection must only be in-

stalled by a trained electrician.

• Prior to using the appliance for the first time, ensure that the rated

voltage and type of supply on the rating plate match that of the sup-

ply where the appliance is to be installed. The fuse rating is also to be

found on the rating plate.

• Multi-way plugs / connectors and extension cables must not be used.

This could constitute a fire hazard through overheating.

• The dishwasher's cable must only be replaced by the Customer Care

Department or a registered electrician.

• A water inlet hose with safety valve must only be replaced by the

Customer Care Department.