AEG FAVORIT 50660 User Information - Page 35

Browse online or download pdf User Information for Dishwasher AEG FAVORIT 50660. AEG FAVORIT 50660 44 pages. Aeg dishwasher

Print Page

Installing the dishwasher

• The dishwasher must be installed on a firm floor and adjusted to en-

sure that it is stable and level in all directions.

• To compensate for unevenness in

the floor and to match the height

of the appliance to that of sur-

rounding units, extend the thread-

ed feet using a screwdriver.

• The drain hose, inlet hose and

mains cable must be laid so that

they are able to move freely within

the plinth area, and so that they

are not kinked or crushed when the

dishwasher is in position.

• The dishwasher must also be

screwed tightly to the work surface

or to the adjoining units. This is essential to ensure the dishwasher

does not tip up.

Free-standing appliances

If the dishwasher is installed directly next to a cooker, a heat-insulat-

ing, non-flammable panel (laminated with aluminium foil on the side

next to the cooker) must be fitted flush with the top edge of the work

surface (depth 57.5 cm).

If the appliance is built-in under a

kitchen work surface, the worktop

supplied with the dishwasher can be

removed in the following way:

1. Unscrew the screws from the elbows

at the rear (1).

2. Push the appliance's worktop back-

wards about 1 cm (2).