Time of Day: The current time of day based on your current
location and time settings (format, time zone, daylight saving
time).
Time to Destination: The estimated time remaining before you
reach the destination. You must be navigating for this data to
appear.
Time to Next: The estimated time remaining before you reach
the next waypoint in the route. You must be navigating for
this data to appear.
To Course: The direction in which you must move to get back
on the route. You must be navigating for this data to appear.
Trip Odometer: A running tally of the distance traveled since
the last reset.
Trip Time - Moving: A running tally of the time spent moving
since the last reset.
Trip Time - Stopped: A running tally of the time spent not
moving since the last reset.
Trip Time - Total: A running tally of the total time spent moving
and not moving since the last reset.
Turn: The angle of difference (in degrees) between the bearing
to your destination and your current course. L means turn
left. R means turn right. You must be navigating for this data
to appear.
Update Rate: The frequency at which the collar sends data to
the handheld device.
Velocity Made Good: The speed at which you are closing on a
destination along a route. You must be navigating for this
data to appear.
Vertical Speed: The rate of ascent or descent over time.
Vertical Speed to Dest: The rate of ascent or descent to a
predetermined altitude. You must be navigating for this data
to appear.
Waypoint at Dest: The last point on the route to the
destination. You must be navigating for this data to appear.
Waypoint at Next: The next point on the route. You must be
navigating for this data to appear.
Troubleshooting
My handheld device is not responding
If your handheld device stops responding, you can reset the
device.
NOTE: This does not erase any of your data or settings.
1
Remove the batteries.
2
Reinstall the batteries
(page
My dog collar devices have conflicting IDs
Each dog you track has its own ID number. If two dogs within
range of the handheld device have the same ID, the handheld
device warns you of a conflicting ID signal. Follow the on-screen
instructions to resolve the conflict.
When possible, you should allow the handheld device to
automatically assign IDs. If necessary, you can manually assign
a new ID number to a dog.
My handheld device does not report barks
NOTE: This feature is not available in all areas.
The bark detection feature does not work if the dog collar device
is not fitted correctly. You should position the device near the
dog's vocal cords or tighten the dog collar device
Appendix
2).
(page
2).
15
Print Page