Garmin Delta Inbounds Owner's Manual - Page 11

Browse online or download pdf Owner's Manual for Pet Care Product Garmin Delta Inbounds. Garmin Delta Inbounds 17 pages.

Print Page

Select Add Collar.

Turn on the dog collar device.

The base unit searches for the device and displays a collar

ID when it is found.

On the base unit, press OK.

The base unit displays a message when the device is paired,

and the LED on the dog collar device flashes.

Press OK to complete the pairing process.

Keep Away Tag Sensor

You can use a Keep Away Tag sensor to keep your dog away

from undesired locations, such as a trash can.

NOTE: If you do not have this sensor, you can skip this section.

Installing the Battery

Locate the circular battery cover

Away Tag sensor.

Twist the cover counter-clockwise until it is loose enough to

remove.

Remove the cover.

Place the battery into the cover with the positive side facing

the inside of the cover.

NOTE: Do not damage or lose the O-ring gasket.

Replace the cover by aligning the dots

clockwise.

When paired with a compatible dog collar device, the Garmin

Canine app indicates when less than 1 wk. battery life remains

for the sensor.

TIP: To replace the battery, you can use a piece of tape

magnet to remove the battery from the cover.

Pairing the Sensor with Your Device

Pairing is the process of connecting an ANT+

like the Keep Away Tag sensor, with a compatible dog collar

device. Your sensor and device must be paired directly through

the Garmin Canine app on your compatible smartphone.

Install the battery in the sensor.

The sensor turns on.

Go to www.garmin.com/apps, and download the Garmin

Canine app to your smartphone.

Open the Garmin Canine app on your smartphone.

Follow the on-screen instructions to pair the sensor with your

device.

Bring your smartphone within 3 m (10 ft.) of the sensor and

the device.

NOTE: Stay 10 m (33 ft.) away from other sensors while

pairing.

Hold the sensor and dog collar device together.

Keep Away Tag Sensor

on the back of the Keep

and rotating

or a

wireless sensor,

When the sensor and device are paired, a message appears.

Follow the on-screen instructions to set the range.

Follow the on-screen instructions to select corrective actions.

Tips for Setting the Range

You can use the Garmin Canine app to set and test the effective

range of the sensor (up to 1 m). The sensor is designed to keep

your dog away from a small, general area.

NOTE: The effective range of the sensor may vary based on

environmental conditions. You should test the range to ensure

the device and sensor perform as expected.

• After the sensor is installed, approach the sensor from

multiple directions with the dog collar device to test the

range.

• Adjust the effective range.

• For best results, select the smallest range necessary to keep

your dog out of undesired areas.

NOTE: Corrections may be inconsistent if the range is set to

a distance greater than 1 m (3 ft.).

Installing the Sensor

You can use the included adhesive mount to install the sensor in

the location your dog should avoid. For example, a trash can.

You can install multiple sensors. Go to buy.garmin.com, or

contact your Garmin dealer for information about optional

accessories.

Attach one side of the adhesive mount to the center of the

battery door.

Attach the other side of the adhesive mount to the location.

Tips for Installing the Sensor

• For consistent performance, place the sensor in a location

with an unobstructed view in all directions.

• For best results, do not place the sensor on or inside metal

objects.

For example, to avoid a metal trash can, you can install the

sensor on the wall near the trash can.

• Do not put the sensor in water.

• Do not bury the sensor.

Pairing the Remote with Your Device

Before you can use the remote with your device, you must pair

your dog collar device with the Garmin Canine app on your

smartphone.

NOTE: If you do not have this accessory, you can skip this

section.

From the app store on your smartphone, install and open the

Garmin Canine app.

From the app menu, select My Family.

Select a dog to pair with the remote.

Follow the instructions in the app to pair the remote with your

device.

After the remote is paired, it connects to your device whenever

the device is in range and turned on.

Customizing Your Device

Setting an Alert Tone

You can enable or disable tones to alert on the base unit when

your dog approaches the boundary.

Select Alert Tones > OK.