Brother DCP-560CN Quick Setup Manual - Page 22
Browse online or download pdf Quick Setup Manual for All in One Printer Brother DCP-560CN. Brother DCP-560CN 35 pages. Brother dcp-350c: quick start
Print Page
STEP 2
Installing the Driver & Software
14
For Windows
users, when this screen appears, choose
Change the Firewall port settings to enable
network connection and continue with the
installation. (Recommended) and click Next.
If you are not using the Windows
the User's Guide for your software for
information on how to add the following
network ports.
For network scanning, add UDP port 54925.
If you still have trouble with your network
connection, add UDP port 137.
Note
• If the machine is configured for your network,
choose the machine from the list, and then click
Next.
This window will not appear if there is only one
machine connected on the network, it will be
chosen automatically.
If your machine shows APIPA in the IP Address
field, click Configure IP Address and enter an IP
address for your machine that is suitable for your
network.
• If the machine is not yet configured for use on your
network, the following screen appears.
Click OK.
The Configure IP Address window will appear.
Enter an IP address for your machine that is
suitable for your network by following the
on-screen instructions.
15
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another. Please wait, it will
take a few seconds for all the screens to
appear.
20
®
XP SP2/Windows Vista™
®
Firewall, see
Note
For Windows Vista™, when this screen appears,
click the check box and click Install to complete
the installation properly.
Improper Setup
DO NOT try to cancel any of the screens during
this installation.
16
When the On-Line Registration screen is
displayed, make your selection and follow the
on-screen instructions.
17
Click Finish to restart your computer.
After restarting the computer, you must be
logged on with Administrator rights.
Note
After restarting the computer, the Installation
Diagnostics will run automatically. If the
installation is unsuccessful, the installation results
window will be shown. If the Diagnostics shows a
failure, please follow the on-screen instructions or
read the on-line help and FAQs in
Start/All Programs/Brother/DCP-XXXX.
The MFL-Pro Suite has been installed
completely. Proceed to Installing
FaceFilter Studio on page 21 to install the
FaceFilter Studio application.
®
Windows