Brother DCP-7040 Quick Setup Manual - Page 15

Browse online or download pdf Quick Setup Manual for All in One Printer Brother DCP-7040. Brother DCP-7040 20 pages. Quick setup guide - spanish
Also for Brother DCP-7040: Quick Setup Manual (18 pages), Quick Setup Manual (19 pages), Quick Setup Manual (32 pages), (Spanish) Guía De Configuración Rápida (20 pages)

Print Page

Installing the Driver & Software

For Mac OS

X 10.2.4 or greater

Important

Make sure that you have finished the

instructions from step 1 Setting Up the

Machine on pages 4 through 7.

Note

For Mac OS

X 10.2.0 to 10.2.3 users, upgrade to

Mac OS

X 10.2.4 or greater. (For the latest

information for Mac OS

http://solutions.brother.com/)

Plug the AC power cord into an AC outlet. Turn

the power switch on.

Connect the USB interface cable to your

computer, and then connect it to the machine.

Improper Setup

DO NOT connect the machine to a USB port on

a keyboard or a non-powered USB hub.

Brother recommends that you connect the

machine directly to your computer.

Turn on your Macintosh

X, visit

Put the supplied CD-ROM into your CD-ROM

drive.

Double-click the Start Here OSX icon to install.

Follow the on-screen instructions.

Note

Please wait, it will take a few seconds for the

software to install. After the installation, click

Restart to finish installing the software.

The Brother software will search for the Brother

device. During this time the following screen

will appear.

When this screen appears, click OK.

For Mac OS

X 10.3.x or greater users:

The MFL-Pro Suite, Brother printer driver,

scanner driver and Brother

ControlCenter2 have been installed and

the installation is now complete.

Go to step 12.