Brother DCP-7060D Quick Setup Manual - Page 2

Browse online or download pdf Quick Setup Manual for All in One Printer Brother DCP-7060D. Brother DCP-7060D 20 pages. Printers
Also for Brother DCP-7060D: Advanced User's Manual (33 pages), Quick Setup Manual (20 pages), Advanced User's Manual (24 pages), Quick Setup Manual (15 pages), Basic User's Manual (5 pages)

Print Page

CAUTION

When you move the machine, grasp the side handholds that are under the scanner. DO NOT carry the machine

by holding it at the bottom.

Note

• Keep a minimum gap around the machine as shown in the illustration.

DCP-7060D

DCP-7065DN

• The components included in the box may differ depending on your country.

• Please save the original packaging should you need to ship the machine in future.

• If for any reason you must ship your machine, carefully repack the machine in the original packaging to avoid

any damage during transit. The machine should be adequately insured with the carrier. For how to repack

the machine, see Packing and shipping the machine in the Advanced User's Guide.

• The interface cable is not a standard accessory. Buy the appropriate interface cable for the interface you

want to use (USB or Network).

USB cable

• It is recommended to use a USB 2.0 cable (Type A/B) that is no longer than 6 feet (2 meters).

• DO NOT connect the interface cable at this time. Connecting the interface cable is done during the MFL-Pro

installation process.

Network cable

Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet

Network.

13.8 in. (350 mm)

3.95 in.

(100 mm)

9.85 in. (250 mm)

3.95 in.

(100 mm)

3.55 in.

(90 mm)

3.55 in.

(90 mm)