AEG FAVORIT 77000 W0P/AU User Manual - Page 18
Browse online or download pdf User Manual for Dishwasher AEG FAVORIT 77000 W0P/AU. AEG FAVORIT 77000 W0P/AU 24 pages.
Print Page18 www.aeg.com
12. INSTALLATION
12.1 Fitting under a kitchen
counter
The plinth of a freestanding appliance is
not adjustable.
Do not remove the appliance worktop if
you want to use it as a freestanding unit.
820 mm
Removing the worktop
3
12.2 Water connection
Water inlet hose
Connect the inlet hose to a water tap
with an external BSP thread spout of
3/4".
For best washing performance it is rec-
ommended to connect the appliance to
a cold water supply.
min 570 mm
600 mm
1
2
4
It is not necessary to remove the work-
top when installing under a standard
kitchen counter.
Only remove the appliance worktop to
install it under a close fitting sink unit or
kitchen counter (820 mm).
Put the appliance adjacent to
1.
a water tap and a water drain.
2.
Make sure that the dimen-
sions of the recess agree with
the dimensions in the figure.
3.
Remove the rear screws (1).
4.
Pull the worktop from behind
(2).
5.
Lift the worktop and move it
from the front slots. (3)
6.
Level the appliance using the
adjustable feet.
7.
Install the appliance under
the kitchen counter.
Energy savings can be made by connect-
ing the appliance to a Solar water sys-
tem and using economy options, howev-
er the water temperature must not ex-
ceed 60 °C.
Inlet water supply
• Water pressure: 800 kPa max - 50 kPa
min.
• Water flow rate 10 L / minute min.