AEG FAVORIT 78002 VI0P/AU User Manual - Page 12
Browse online or download pdf User Manual for Dishwasher AEG FAVORIT 78002 VI0P/AU. AEG FAVORIT 78002 VI0P/AU 24 pages.
Print Page12 www.aeg.com
7. DAILY USE
1. Open the water tap.
2. Press the on/off button to activate
the appliance. Make sure that the ap-
pliance is in setting mode, refer to
"Setting and starting a program".
• If the salt indicator is on, fill the salt
container.
• If the rinse aid indicator is on, fill
the rinse aid dispenser.
7.1 Using the detergent
A
7.2 Setting and starting a
program
Setting mode
For some settings it is necessary that the
appliance is in setting mode.
Press the on/off button to activate the
appliance. The appliance is in setting
mode when the display shows 2 horizon-
tal status bars. If the control panel does
not show this condition, press RESET.
Starting a program without
delay start
1. Open the water tap.
2. Press the on/off button to activate
the appliance. Make sure that the ap-
pliance is in setting mode.
3. Press one of the program buttons
again and again until the display
shows the number of the program
you want to start. The program num-
ber flashes in the display. If you want
you can set the applicable options.
B
30
A
20
+
-
C
3. Load the baskets.
4. Add the detergent.
• If you use the combi detergent
tablets, activate the Multitab op-
tion.
5. Set and start the correct program for
the type of load and the degree of
soil.
1.
Press the release button (B) to open
the lid (C).
2.
Put the detergent in the compart-
ment (A) .
3.
If the program has a prewash phase,
put a small quantity of detergent on
the inner part of the appliance door.
4.
If you use detergent tablets, put the
tablet in the compartment (A).
5.
Close the lid. Make sure that the re-
lease button locks into position.
4. Close the appliance door, the pro-
gram starts. The program duration
starts to decrease with steps of 1 mi-
nute.
Starting a program with delay
start
1. Set the program.
2. Press Delay again and again until the
display shows the delay time you
want to set (from 1 to 24 hours).
• The delay time flashes in the dis-
play.
• The Delay indicator comes on.
3. Close the appliance door. The count-
down starts.
• When the countdown is comple-
ted, the program starts.
Opening the door while the
appliance operates
If you open the door, the appliance
stops. When you close the door, the ap-