Brother DCP-8110DN Product Safety Manual - Page 6

Browse online or download pdf Product Safety Manual for All in One Printer Brother DCP-8110DN. Brother DCP-8110DN 22 pages. Printer
Also for Brother DCP-8110DN: Manual (36 pages), Advanced User's Manual (50 pages), Network Manual (29 pages), Manual (27 pages), Quick Setup Manual (23 pages), User Manual (23 pages), Product Safety Manual (23 pages), Advanced User's Manual (39 pages)

Print Page

DO NOT allow this product to come into contact with water. This product should not be used

around standing water, including a bath tub, sink, or swimming pool; around appliances

containing water, including a refrigerator; or in a wet basement.

This product should be connected to an AC power source within the range indicated on the

rating label. DO NOT connect it to a DC power source or inverter. If you are not sure what kind

of power source you have, contact a qualified electrician.

Power Cord Safety:

• This product is equipped with a 3-wire grounded plug. This plug will only fit into a grounded

power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, call

your electrician to replace your obsolete outlet. DO NOT defeat the purpose of the grounded

plug.

• Use only the power cord supplied with this product.

• DO NOT allow anything to rest on the power cord. DO NOT place this product where people

can walk on the cord. DO NOT place this product in a position where the cord is stretched or

strain is otherwise put on the cord. Doing so may cause the cord to become worn or frayed.

• Brother strongly recommends that you DO NOT use any type of extension cord.

(MFC only)

Use caution when installing or modifying telephone lines. Never touch telephone wires or

terminals that are not insulated unless the telephone line has been unplugged at the wall jack.

Never install telephone wiring during a lightning storm. Never install a telephone wall jack in a

wet location.