A-Fire Design AWP 20-50 User Manual - Page 3
Browse online or download pdf User Manual for Indoor Fireplace A-Fire Design AWP 20-50. A-Fire Design AWP 20-50 11 pages.
Print Page
The device must be installed in compliance with the instructions in paragraphs 3, 4, and 5.
Users are prohibited from interfering with the safety systems.
Installation and use of the devices are subject to the rules and procedures for use in the country where
the devices are installed.
Do not use the device if it is damaged after falling or any other reason. Contact AFIRE aftersales
service.
Do not let children or disabled persons use the device without supervision.
Do not use outdoors.
While the device is in functioning: Attention! Do not look at the device over this one. You risk to be
dazzled by the light.
Cut off electric power before any handling of the device, in particular before cleaning, transporting, or
repairing it.
For storage, be sure to keep the device in a dry location with no risk of damage.
Do not modify the device. Its use must comply with this manual.
ATTENTION! SAFETY WARNING
Use in a regularly ventilated room.
Ventilation vents in the room must not be obstructed and/or ventilation systems in the home must not
be hindered.
If the power cable to your device is damaged, it must be replaced by a professional or by AFIRE in
order to prevent any danger.
Never use accessories not supplied by AFIRE.
Keep the remote control out of reach of children. It contains batteries. If batteries are swallowed,
contact a doctor immediately.
Only use new batteries. Using recharge or old batteries or batteries that are not adapted or batteries
inserted backward may cause an explosion and cause injury.
FCC precaution: Modifications not expressly approved by the party responsible for compliance will
result is canceling the user's right to use the device.
2- DEVICE TECHNICAL CHARACTERISTICS