AEG OKO FAVORIT 54750 VI Operating Instructions Manual - Page 9
Browse online or download pdf Operating Instructions Manual for Dishwasher AEG OKO FAVORIT 54750 VI. AEG OKO FAVORIT 54750 VI 32 pages. Aeg dishwasher
Print Page
Before using your dishwasher for the first time
1
. Ensure that the electrical and water connections comply with the installation instructions.
2. Remove all packaging from inside the appliance.
3. Set the water softener.
4. Pour 1 litre of water inside the salt container and then fill with salt.
5. Fill the rinse-aid dispenser.
Setting the water hardness range
The dishwasher is equipped with a water softener designed to remove minerals and salts from
the water supply, which would have a detrimental or adverse effect on the operation of the
appliance.
The higher the content of these salts, the harder your water is.
Water hardness is measured in equivalent scales, German, French degrees and PPM (parts per
Million).
The softener should be adjusted according to the hardness of the water in your area. Your
local Water Authority can advise you on the hardness of the water in your area.
The dishwasher is factory set at level 3.
If this level is not suitable for your area the softener should be adjusted.
You may change the factory level setting by means of the wash programme selector push
buttons. Each push button corresponds to a different level.
Level 1
Level 2 = "Intensive 70°C"
Level 3 = "Normal 65°C"
Level 4 = "BIO 50°C"
Level 5 = "Quick 50°C"
Level
(german degrees)
1
2
3
12 - 22
4
23 - 39
5
40 - 50
If your water hardness is level 1 it is already soft and therefore there is no need to use
salt. With the setting of the water softener at level 1 the salt indicator light on the
control panel will always remain off.
= "Rinse and Hold"
Water hardness
dH°
(french degrees)
0 - 4
5 - 11
9 - 20
21 - 40
41 - 70
71 - 90
push button
push button
push button
push button
push button
°TH
(parts per million)
0 - 8
0 - 80
81 - 200
201 - 400
401 - 700
701 - 900
BIO
Use
PPM
of salt
NO
YES
YES
YES
YES
9