Brother MFC-J435W Product Safety Manual - Page 5

Browse online or download pdf Product Safety Manual for All in One Printer Brother MFC-J435W. Brother MFC-J435W 17 pages. Product safety guide - spanish
Also for Brother MFC-J435W: Advanced User's Manual (47 pages), Manual (12 pages), Manual (21 pages), Quick Setup Manual (37 pages), Safety Manual (17 pages), Quick Setup Manual (37 pages), (Spanish) Manual (21 pages), (Spanish) Manual (16 pages)

Print Page
Brother MFC-J435W Product Safety Manual
If water, other liquids, or metal objects get inside the machine, immediately unplug the machine
from the AC power outlet and contact Brother Authorized Service Personnel.
DO NOT connect it to a DC power source or inverter. If you are not sure what kind of power
source you have, contact a qualified electrician.
Power Cord Safety:
• DO NOT pull on the middle of the AC power cord; pulling on the middle may cause the cord
to separate from the plug. Doing this might cause an electrical shock.
• DO NOT allow anything to rest on the power cord.
• DO NOT place this machine where people can walk on the cord.
• DO NOT place this machine in a position where the cord is stretched or strain is otherwise
put on the cord, as it may become worn or fray.
• If an extension cord is used with this machine, make sure that the total ampere ratings on
the machines plugged into the extension cord DO NOT exceed the extension cord ampere
rating. Also, make sure that the total of all machines plugged into the AC power outlet does
not exceed 15 amperes (USA only).
(MFC models only)
Never touch telephone wires or terminals that are not insulated unless the telephone line has
been unplugged at the wall jack. Never install telephone wiring during a lightning storm. Never
install a telephone wall jack in a wet location.
FIRE HAZARDS
Failure to follow the warnings in this section may create the risk of a fire.
DO NOT use flammable substances, any type of spray or an organic solvent/liquid that contains
alcohol or ammonia to clean the inside or outside of the machine. Doing this may cause a risk
of fire or electrical shock.
DO NOT use this machine in the vicinity of combustible dust.
5