AEG 130 FG-m Instruction Book - Page 15

Browse online or download pdf Instruction Book for Hob AEG 130 FG-m. AEG 130 FG-m 33 pages. Grill / fryer design "domino"
Also for AEG 130 FG-m: Instruction Book (25 pages), Instruction Book (29 pages)

AEG 130 FG-m Instruction Book
Mounting
The hob unit can be mounted in any
type of kitchen with a table surface
whose thickness is between 28 mm and
40 mm.
Fixing
Unscrew the fixing brackets just enough
so they may be turmed. Fasten the
brackets to the worktop with a screw
driver.
Cut-out measurements
One rectangular hole is sawn out for the
hob combination chosen.
The depth of the cut-out for any unit is:
490 mm
Length of hole = sum of all units`
externally measured length, less 20 mm.
Mounting of Reinforcement
Beams
A reinforcement Beam, with supporting
flanges at each end, is included with
each two-burner unit. For unit
combinations, a reinforcement beam
must be used between each unit. It is not
necessary to attach the reinforcement
beam to the worktop surface, as it is held
in place by a specially designed
moulding, which is incorporated in the
hob unit´s flanges.