Brother MFC-J5855DW Quick Setup Manual - Page 2

Browse online or download pdf Quick Setup Manual for All in One Printer Brother MFC-J5855DW. Brother MFC-J5855DW 2 pages.
Also for Brother MFC-J5855DW: Quick Setup Manual (2 pages), Product Safety Manual (23 pages), Product Safety Manual (23 pages)

Print Page

Machine settings

Follow the LCD instructions to configure

the machine settings.

• Configure the tray settings and check

the paper orientation information (not

available on all models).

• Check the software installation

information.

Select your language

(if needed)

1. Press

[Settings] > [All

Settings] > [Initial Setup] >

[Local Language].

2. Press your language.

3. Press

Connect your computer or mobile device to your machine

Follow these steps to complete the setup using one of the connection types available on your machine.

Visit

setup.brother.com

to download and install

Brother software.

setup.brother.com

NOTE

For Windows only, CD installation is also available (for

some countries).

Can't Connect? Check the following:

Wireless network

Wired network

USB connection

Manual wireless setup

If the wireless setup is not successful, try to set up the connection manually.

Find your SSID (Network Name) and Network Key

(Password) on your wireless access point/router

and write them in the table provided below.

SSID (Network Name)

Network Key (Password)

SSID: XXXXXXX

Network Key: XXXX

If you cannot find this information, ask your network

administrator or wireless access point/router

manufacturer.

For detailed machine information and product specifications, see the Online User's Guide at support.brother.com/manuals.

Connect the telephone line cord

If you are not using your machine as a fax, go to

Online User's Guide.

Lift the scanner cover.

Select the correct

Receive Mode

If you are not using your machine as a

fax, go to

1. Press

[Settings] > [All Settings]

> [Fax] > [Setup Receive] > [Receive

Mode].

2. Press your preferred Receive Mode.

3. Press

Follow the on-screen instructions and prompts.

NOTE

For Wired Network Connection and USB Connection,

locate the correct port (based on the cable you are using)

inside the machine as shown.

Restart your wireless access point/

router (if possible).

Disconnect the cable.

Go to your machine,

and press

[Find Wi-Fi Network] >

[Yes].

. For more information on using the fax feature, see the

Connect the telephone

line cord. Use the jack

marked LINE and guide

the cord out the back of

the machine.

Set your Station ID

If you are not using your machine as a fax, go to

Store your name and fax number so the machine prints it on

all outgoing fax pages.

1. Press

[Settings] > [All Settings] > [Initial

Setup] > [Station ID] > [Fax].

2. Enter your fax number (up to 20 digits) on the touchscreen

and then press [OK].

3. Press [Name].

4. Enter your name (up to 20 characters) using the

touchscreen, and then press [OK].

5. Press

You can now print and scan using your machine.

To check for the latest firmware, visit

support.brother.com/up7.

Important Notice for Network Security:

The default password to manage this machine's

settings is located on the back of the machine

and marked "Pwd". We recommend immediately

changing the default password to protect your

machine from unauthorized access.

Restart your machine and

computer, and then go to

Select the SSID (Network

Name) for your access point/

router and enter the Network Key

(Password).

When the wireless setup is

successful, the LCD displays

[Connected].

If setup is not successful, restart

your Brother machine and your

wireless access point/router, and

repeat

Close the scanner cover.

Setup Finished

If still not successful, go to

If still not successful, visit

support.brother.com

for FAQs and Troubleshooting.

Go to

to install software.