Brother MFC-J6910DW Quick Setup Manual - Page 39

Browse online or download pdf Quick Setup Manual for All in One Printer Brother MFC-J6910DW. Brother MFC-J6910DW 41 pages. Quick setup guide - english

Print Page

For Network Users

Restore the network settings to factory default

To restore all network settings of the internal Print/Scan server to factory default, please follow the steps below.

Make sure the machine is not operating, then disconnect all the cables from the machine (except the power

cord).

Press MENU.

Press Network.

Press a or b to display Network Reset and press Network Reset.

Press Yes.

Hold down Yes for 2 seconds to confirm.

The machine will restart, re-connect cables once this is complete.

Entering Text for Wireless Settings

Up to four letters are assigned to each letter button on the Touchscreen. By pressing the proper button repeatedly,

you can access the character you want.

Press

to cycle between letters, numbers and special characters. (The characters available may differ

depending on your country.)

Inserting spaces

To enter a space, press

Making corrections

If you entered a character incorrectly and want to change it, press d or c to move the cursor to the incorrect

character, press

. Re-enter the correct character. You can also back up and insert a character.

Repeating characters

If you need to enter a character that is on the same button as the character before, press c to move the cursor to

the right before you press the button again.

then press the space button