AEG 3531 WK-m Instruction Book - Page 9

Browse online or download pdf Instruction Book for Hob AEG 3531 WK-m. AEG 3531 WK-m 10 pages. Electrolux cooktop user manual
Also for AEG 3531 WK-m: Instruction Book (24 pages), Instruction Book (12 pages)

Print Page

Mounting

Caution: In order to avoid a hazard this

appliance must be installed according to

these instructions for installation

The hob unit can be mounted in any

type of kitchen with a table surface

whose thickness is between 28 mm and

40 mm.

Headroom

The distance to any shelves or tops of a

cabinet under the hob is to be at least 55

mm.

Fixing

Screw the fixing brackets out to such an

extent that they can be turned in under

the table top. Tighten the brackets on to

the table top with an ordinary

screwdriver.

Cut-out measurements

One rectangular hole is sawn out for the

hob combination chosen.

The depth of the cut-out for any unit is:

490 mm

Length of hole = sum of all units`

externally measured length, less 20 mm.

Mounting of Reinforcement

Beams

A reinforcement Beam, with supporting

flanges at each end, is included with

each two-burner unit. For unit

combinations, a reinforcement beam

must be used between each unit.

Minimum distance

Minimum distance to

to wall:

wall (non flammable

150 mm

material): 50 mm

Reinforcement

beams

Ignitions

1. Depress and turn the control knob

for the burner, the left to Max. flame

2. The ignition electrode will emit

sparks, and when the mixture of gas

and air is correct, the burner will be

ignited. Is not possible to connect

the unit to mains, a match may be

used to ignite the burner

3. After starting the burner, press the

control knob for approx. 10

seconds to activate the automatic

thermo couple.

4. Important Ignition position is at

Max flame