Brother MFC-J835DW Quick Setup Manual - Page 34

Browse online or download pdf Quick Setup Manual for All in One Printer Brother MFC-J835DW. Brother MFC-J835DW 45 pages. Quick setup guide - spanish
Also for Brother MFC-J835DW: Manual (12 pages), Manual (21 pages), Product Safety Manual (17 pages), Web Connect Manual (22 pages), Safety Manual (17 pages), Troubleshooting Manual (6 pages), (Spanish) Manual (21 pages), (Spanish) Manual (16 pages), (Spanish) Guía De Configuración Rápida (44 pages)

Print Page

For Wireless Network Users

One-push configuration

using WPS or AOSS™

(Windows

Macintosh)

Confirm your wireless access point/router has

the WPS or AOSS™ symbol as shown below.

Place the Brother machine within range of your

WPS or AOSS™ access point/router. The

range may differ depending on your

environment. Refer to the instructions provided

with your access point/router.

On your machine, press Menu.

Press Network.

Press WLAN.

Press WPS/AOSS.

When Switch Network interface to

wireless? is displayed, press Yes to accept.

This will start the wireless setup wizard.

To cancel, press No.

Note

If your wireless access point/router supports WPS

(PIN Method) and you want to configure your

machine using the PIN (Personal Identification

Number) Method, see Configuration using the

PIN Method of Wi-Fi Protected Setup in the

Network User's Guide.

When the LCD shows Start WPS or AOSS,

press the WPS or AOSS™ button on your

wireless access point/router. See the user's

guide for your wireless access point/router for

instructions.

Then press OK and your machine will now

automatically detect which mode (WPS or

AOSS™) your wireless access point/router

uses and try to connect to your wireless

network.

and

A connection result message appears for

60 seconds on the LCD and a wireless LAN

report will automatically be printed.

If the connection failed, check the error code on

the printed report and refer to Troubleshooting

on page 35.

Wireless setup is now complete. A four

level indicator at the upper right of your

machine's LCD will show the wireless

signal strength of your access

point/router.

To install MFL-Pro Suite, continue to

step 19.

For Windows

Users:

Now go to

Page 37

For Macintosh Users:

Now go to

Page 40