Brother MFC-L2680W Quick Setup Manual

Browse online or download pdf Quick Setup Manual for All in One Printer Brother MFC-L2680W. Brother MFC-L2680W 2 pages. Brother laser printers quick setup guide
Also for Brother MFC-L2680W: How To Replace Drum Unit (12 pages), Product Safety Manual (25 pages), Quick Setup Manual (2 pages), Quick Setup Manual (2 pages), Quick Setup Manual (2 pages)

Print Page
Brother MFC-L2680W Quick Setup Manual
HL‑L2305W / HL‑L2340DW / HL‑L2360DN / HL‑L2360DW /
HL‑L2361DN / HL‑L2365DW / HL‑L2366DW
Quick Setup Guide
Unpack the machine and check the components
Watch our FAQ Videos for help
with setting up your Brother
machine:
solutions.brother.com/videos.
Inbox/Starter Toner
1
Remove the packing materials and install the toner cartridge
2

Load paper in the paper tray

3
Connect the power cord and turn on the machine
Back
4
Select your language (Only for certain models)
1.
Press ▼ or ▲ to select General Setup, and then press OK.
2.
Press OK to select Local Language.
3.
Press ▼ or ▲ to select your language, and then press OK.
5
Connect the machine to your computer/mobile device
• Windows
PC with a CD-ROM drive, go to step
®
• Windows
PC without a CD-ROM drive, go to step
®
• Macintosh, go to step
5B
• Mobile device users with a WPS/AOSS™-supported access point/router, go to step
A
Drum Unit
AC Power Cord
(Pre-installed)
(only for certain models)
B
CD‑ROM
Cartridge
Remove the orange part.
Front
5A
5B
Not all models are available in all countries.
The latest manuals are available at the Brother
Solutions Center: solutions.brother.com/manuals.
Quick Setup Guide
Product Safety Guide
B
A
Remove the orange part.
Adjust the paper guides.
5C
Read the Product Safety Guide first, then read this Quick Setup Guide for the
correct installation procedure.
Manuals in Spanish for this model are available on the enclosed CD-ROM. (USA
only)
Manuales en Español para este modelo están disponibles en el CD-ROM
incluido. (sólo en Estados Unidos)
NOTE:
• The components included in the box and the AC power plug may differ
depending on your country.
• The available connection interfaces vary depending on the model.
• The illustrations in this Quick Setup Guide are based on the HL-L2365DW.
• You must purchase the correct interface cable for the interface you want to use.
USB cable
We recommend using a USB 2.0 cable (Type A/B) that is no more than
2 meters (6 feet).
Network cable
Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T
or 100BASE-TX Fast Ethernet Network.
A
B
Version A
ENG
B
A