AEG 35941G Operating And Installation Instructions - Page 24
Browse online or download pdf Operating And Installation Instructions for Hob AEG 35941G. AEG 35941G 26 pages. Gas hob
Also for AEG 35941G: Operating And Installation Instructions (26 pages), Operating And Installation Manual (26 pages), Operating Instructions Manual (20 pages), Operating And Installation Instructions (26 pages), Operating And Installation Instructions (27 pages)
Print Page
Fault finding
Ignition System / Gas Ignition
Ignitor does not spark
N O
Check plug top fuse and
replace if necessary
Check polarity and earth
continuity of supply point
Check earth continuity
of appliance
Check continuity from 'N' on the
mains connector block and "O" on
the ignitor unit
Check continuity from 'L' on the
mains connector block and the
taps ignition switches
Check continuity from ignition
switches connector to ignitor unit
All manuals and user guides at all-guides.com
Y E S
Check gas supply at
burner
Light burner manually
Check by pass simmer
adjusted
Check position of the
electrode
Check continuity from the tip of
each electrode to the terminals 1
to 5 on the ignitor unit
Check for breaks in the insulation
of the HT leads
Change the taps ignition
switches
Change the ignitor unit
Check fitting
of burners