Brother MFC-T920DW User Manual - Page 20

Browse online or download pdf User Manual for All in One Printer Brother MFC-T920DW. Brother MFC-T920DW 23 pages.
Also for Brother MFC-T920DW: Quick Setup Manual (4 pages), Quick Setup Manual (4 pages), Quick Setup Manual (4 pages), Quick Setup Manual (4 pages), Quick Setup Manual (4 pages), Quick Setup Manual (4 pages), Product Safety Manual (18 pages)

Print Page

• Maximum power spectral density: ≤ 10 dBm / MHz (EIRP)

• Carrier frequency tolerance: 20 ppm

• Out-of-band emission power (Outside the 2.4 to 2.4835 GHz

frequency band)

≤ -80 dBm / Hz (EIRP)

• Spurious emission (radiation) power (Outside the range of the

corresponding carrier ± 2.5 times the channel bandwidth):

≤ -36 dBm / 100 kHz (30 - 1000 MHz)

≤ -33 dBm / 100 kHz (2.4 - 2.4835 GHz)

≤ -40 dBm / 1 MHz (3.4 - 3.53 GHz)

≤ -40 dBm / 1 MHz (5.725 - 5.85 GHz)

≤ -30 dBm / 1 MHz (1 - 12.75 GHz for others)

2. DO NOT, without appropriate permission, attempt to alter the emission

frequency or increase the emission power (including by installing an

additional RF power amplifier), or connect any external antenna or use

any unspecified transmitting antenna.

3. This equipment must not cause harmful interference to other radio

services. In case such interference occurred, the equipment must be

stopped immediately and cannot be used until the appropriate

measures are taken to eliminate the harmful interference.

4. This micro-power wireless equipment must accept any interference

caused by the legal operation of other radio services or radiated

interference received from the industrial, scientific and medical

appliances.

5. DO NOT use this equipment anywhere near the plane or airport.

LAN Connection (Models with Wired LAN

Function Only)

CAUTION

DO NOT connect this product to a LAN connection that is subject to

over-voltages.