Brother Work Smart MFC-J470dw Quick Setup Manual - Page 24

Browse online or download pdf Quick Setup Manual for All in One Printer Brother Work Smart MFC-J470dw. Brother Work Smart MFC-J470dw 37 pages. Printers
Also for Brother Work Smart MFC-J470dw: Air Print Manual (12 pages), Advanced User's Manual (48 pages), Specfications (2 pages), Quick Start Manual (35 pages), Quick Start Manual (35 pages)

Print Page

Brother Work Smart MFC-J470dw Quick Setup Manual

For Wireless Network Users

Manual setup from the

control panel using the

Setup Wizard

Macintosh and mobile devices)

You must have the wireless settings you

wrote down for your network in step 17-b on

page 21 before you proceed.

If you began the wireless setup from step 7 on

page 9, press a or b to choose Setup Wizard

and press OK. Then go to c.

All other users go to b.

On your machine, press Menu.

Press a or b to choose Network. Press OK.

Press a or b to choose WLAN. Press OK.

Press a or b to choose Setup Wizard. Press

OK.

When Enable WLAN? is displayed, press OK

to accept.

This will start the wireless setup wizard.

To cancel, press Stop/Exit.

The machine will search for available SSIDs. It

will take several seconds to display a list of

available SSIDs.

If a list of SSIDs is displayed, press a or b to

choose the SSID you wrote down in step 17-b

on page 21. Press OK.

If the wireless access point/router of the

selected SSID supports WPS, and the machine

asks to use WPS, go to e.

If the machine asks you to enter a Network

Key, go to f.

Otherwise, go to g.

NOTE

• If the list is blank, check that the wireless

access point/router has power and is

broadcasting the SSID. Move your machine

closer to the wireless access point/router and

try starting from a again.

• If your access point is set to not broadcast the

SSID, you will have to manually add the SSID

name. For more information, see Configure

Your Wireless Network When the SSID Is Not

Broadcast in the Software and Network User's

Guide.

(Windows

NOTE

To install MFL-Pro Suite, continue to

step 19.

For Windows

Page 28

For Macintosh users:

Page 31

Press 1 (Yes) to connect your machine using

WPS. (If you choose 2 (No) to continue manual

configuration, go to f to enter a Network Key.)

When the LCD shows Start WPS, press the

WPS button on your wireless access

point/router, and then press 1 (Next) to

proceed. Go to g.

Enter the Network Key you wrote down in

step 17-b on page 21 using the dial pad to

choose each letter or number.

The letters appear in this order: lower case, upper

case and then numbers. To move the cursor left

or right, press d or c.

(For more information, see Entering Text for

Wireless Settings on page 34.)

Press OK when you have entered all the

characters, then press 1 (Yes) to apply your

settings.

Your machine will now try to connect to your

wireless network. It may take a few minutes.

Wireless setup is now complete.

For mobile device users:

• Connect your mobile device to a wireless

access point/router using a Wi-Fi connection.

• Download and install Brother iPrint&Scan

(Android™/iOS/Windows

mobile device's application download site. You

can also use AirPrint (iOS) with this machine.

• To download the User's Guide for the

application you are using (Brother

iPrint&Scan/AirPrint), visit the Brother

Solutions Center at

http://solutions.brother.com/ and click Manuals

on your model's page.

• If you began the setup from step 7 on page 9,

go back to step 8 to continue the machine

settings.

users:

Now go to

Phone) from your