Brother D02YBS001-00 Quick Setup Manual

Browse online or download pdf Quick Setup Manual for Printer Brother D02YBS001-00. Brother D02YBS001-00 2 pages.

Print Page
Brother D02YBS001-00 Quick Setup Manual
D02YBS001-00
USA/CAN
Version A
EN
Unpack the machine and check the components
Remove the protective tape or film covering the machine and the supplies.
Toner Cartridge and Drum Unit
AC Power Cord
1
Remove the packing materials and install the toner cartridge and drum unit assembly
2
Load paper in the paper tray
3
Connect the power cord and
turn the machine on
Back
NOTE:
Before connecting the power cord, locate the Serial Number
label on the back or side of the machine. Record this number
for product registration and warranty support.
Quick Setup Guide
HL-L2465DW / DCP-L2640DW / DCP-L2660DW / HL-L2480DW /
MFC-L2760DW / MFC-L2807DW / MFC-L2820DW / MFC-L2820DWXL / MFC-L2880DW
Read the Product Safety Guide first, then read this Quick Setup Guide for the correct installation procedure.
Not all models are available in all countries.
The latest manuals are available at the Brother support website:
support.brother.com/manuals
Toner Cartridge Replacement
Assembly
(MFC-L2820DWXL only.
Product Safety Guide
Quick Setup Guide
1
Adjust the paper
Front
NOTE:
• Manuals in Spanish for this model are available at support.brother.com.
Manuales en Español para este modelo están disponibles en
support.brother.com.
• The components included in the box may differ depending on your country.
• The available connection interfaces vary depending on the model.
If you use a wired connection, you must purchase the correct cable for the
interface you want to use.
• USB cable
Save for later use.)
We recommend using a USB 2.0 cable (Type A/B) that is no more than
6 feet (2 meters) long.
• Network cable (for wired network models only)
Use a straight-through Category 5 (or greater) twisted-pair cable.
• The screens and images in this Quick Setup Guide show the MFC-L2820DW.
• Save all packing materials and the box in case you must ship your machine.
2
1
Remove the orange part.
Do not exceed this mark.
guides.
4
Select your language (if needed)
„ For LCD models:
1.
Press Menu.
2.
Press ▲ or ▼ to display
[Initial Setup], and then
press OK.
3.
Press ▲ or ▼ to display
[Local Language], and then
press OK.
4.
Press ▲ or ▼ to select your
language, and then press OK.
5.
Press Stop/Exit.
Push firmly.
„ For touchscreen models:
1.
On the machine's touchscreen,
press
[Settings] >
[All Settings] >
[Initial Setup] >
[Local Language].
2.
Select your language.
3.
Press
.