AEG 69802 G Operating Instructions Manual - Page 22
Browse online or download pdf Operating Instructions Manual for Hob AEG 69802 G. AEG 69802 G 28 pages. Electrolux cooktop user manual
Also for AEG 69802 G: Brochure & Specs (12 pages), Operating Instructions Manual (24 pages)
Print Page
Commissioning
When the hob has been fully installed it will be necessary to check the minimum flame
setting. To do this, follow the procedure below.
# # # # #
1) Turn the gas tap to the MAX position and ignite.
2) Set the gas tap to the MIN flame position then turn the control knob from MIN to
MAX several times. If the flame is unstable or is extinguished follow the procedure
below.
Procedure:
# # # # #
1) Re-ignite the burner and set to
MIN.
2) Remove the control knob.
3) To adjust, use a thin bladed
screwdriver and turn the
adjustment screw (it can be
located down the centre of the gas
tap shaft or on the tap body,
according to the different models
- see diagram) until the flame is
steady and does not extinguish,
when the knob is turned from MIN
to MAX. Repeat this procedure for
all burners.
Pressure Testing
# # # # #
1) Remove left hand pan support and front left burner cap and crown.
2) Fit manometer tube over the injector.
3) Turn on the burner gas supply and ignite another burner supply.
The pressure reading should be nominally 20 mbar and must be between 17 mbar
and 25 mbar.
4) Turn off the burner supplies.
22
Minimum adjustment screw
Instructions for the Installer