Brother DCP-585CW Quick Setup Manual - Page 16

Browse online or download pdf Quick Setup Manual for Printer Brother DCP-585CW. Brother DCP-585CW 29 pages. Quick setup guide - spanish
Also for Brother DCP-585CW: Brochure & Specs (2 pages), Quick Setup Manual (45 pages), (Spanish) Guía De Configuración Rápida (43 pages)

Print Page

For Wireless Network Users

Connecting the Brother machine to the wireless network

Configure the wireless

settings (Typical

Wireless Setup in

infrastructure mode)

On your machine, press Menu.

Press a or b to choose Network and press

OK.

Press a or b to choose WLAN and press OK.

Press a or b to choose Setup Wizard and

press OK.

When Network I/F switched to

Wireless is displayed, press OK to accept.

This will start the wireless setup wizard.

To cancel, press Clear/Back.

The machine will search for available SSIDs. If

a list of SSIDs is displayed, use the a or b keys

to choose the SSID you wrote down in step 10

on page 15, then press OK. Go to f.

Note

It will take several seconds to display a list of

available SSIDs.

If your access point is set to not broadcast the

SSID you will have to manually add the SSID

name. Go to c.

Press a or b to choose <New SSID> and press

OK. Go to d.

Enter the SSID you wrote down in step 10 on

page 15 using the a, b keys to choose each

letter or number.

You can use the d and c keys to move the

cursor left and right. For example, to enter the

letter a, press the a key once. To enter the

number 3, hold down the a key until it appears.

The letters appear in this order: lower case,

upper case, numbers and then special letters.

(For more information, see Entering Text for

Wireless Settings on page 21.)

Press OK when you have entered all the

characters.

Press a or b to choose Infrastructure,

then press OK.

Use the a, b and OK keys to choose one of the

options below: If your network is configured for

Authentication and Encryption you must match

the settings used for your network.

No Authentication or Encryption:

Choose Open System, press OK then

choose None for Encryption Type? and

press OK. Then press

settings. Go to i.

No Authentication with WEP Encryption:

Choose Open System, press OK then use

the a or b to choose WEP for the

Encryption Type? and press OK.

Go to g.

Authentication with WEP Encryption:

Choose Shared Key and press OK.

Go to g.

Authentication with WPA/WPA2-PSK

(TKIP or AES) Encryption:

Choose WPA/WPA2-PSK and press OK.

Go to h.

Press a or b to choose the appropriate key

number and press OK. Enter the WEP key you

wrote down in step 10 on page 15 using the a,

b keys to choose each letter or number.