2N Lift8 Brief Manual - Page 8
Browse online or download pdf Brief Manual for Intercom System 2N Lift8. 2N Lift8 14 pages. Io module
Also for 2N Lift8: Brief Manual (8 pages), Brief Manual (12 pages), Brief Manual (13 pages), Brief Manual (6 pages), Brief Manual (12 pages), Brief Manual (17 pages)
Print Page
The camera module helps you connect a lift cabin camera of the IP, RS-232 and RS-485
type. The camera module can work with the Central Unit (CU), or autonomously. It
contains a microSD card slot for recording images in variable intervals.
Connect the camera module to the CU or splitter via a 2-wire bus to support the 2N
Lift8 communication. Connect a local power supply to record images on the microSD card.
Caution
Local power is supported.
Connect the local power supply if:
Electric Installation
Bus connection
Connect the camera module via a 2-wire bus (audio unit bus) to the CU or splitter
maintaining polarity.
an IP camera communicating with the CU is connected to the
camera module
images are recorded on the microSD card in certain intervals
the camera module works autonomously without bus connection
1.
Audio unit bus +
2.
Audio unit bus -
EN
®
7