AEG 88101 Service Manual - Page 16
Browse online or download pdf Service Manual for Hob AEG 88101. AEG 88101 22 pages. Induction hobs
Print Page
4 Pot Detection Information
Suitable pot materials:
•
Steel enamel
•
Stainless steel (with magnet. bottom)
•
Aluminium (with magnet. bottom)
•
Cast iron
Unsuitable materials:
•
Aluminium (
too much power)
•
Copper
•
Stainless steel (not magnetic)
•
Glass
•
Ceramic
The pot detection is designed for the following diameters:
Nominal burner ∅ [mm]
145
180
210
260
With regard to Ind. G4, the same diameter is stipulated in the instruction manuals as for the previous
model. However, the real diameter which still functions is much smaller.
The performance for different pots can very by as much as +/- 10-15%.
•
As reference pots, we recommend enamelled steel pots (e.g. Silit).
•
2-3 mm thick round steel plates in various diameters are very suitable for testing the pot detection
function.
•
Sandwich bottoms can cause very unpleasant noises if they are not correctly pressed. The same
is the case with regard to handles which are a little loose.
•
The bottom diameter of the pot is decisive and not the
exterior diameter.
•
With regard to stainless steel pots with sandwich bottoms,
the diameter of the magnetic part of the pot bottom is
decisive.
•
an additional influencing factor is the vertical distance from
the coil, i.e. an uneven sandwich bottom has a negative
effect on the power consumption. The effect is exactly the
same if the induction coil is not pressed on the glass
ceramic.
DGS-TDS
21.04.08
16
Minimum pot bottom ∅
instruction manual [mm]
125
145
180
180
599 519 523 EN
Minimum pot bottom ∅
adjusted with steel plate
[mm]
100
120
140
180