Brother DCP-J152W Quick Setup Manual - Page 2

Browse online or download pdf Quick Setup Manual for Printer Brother DCP-J152W. Brother DCP-J152W 33 pages.
Also for Brother DCP-J152W: Advanced User's Manual (48 pages), Product Safety Manual (16 pages)

Print Page

Remove the protective tape and film covering

the machine, and also from the LCD.

Remove the plastic bag a containing the ink

cartridges from on top of the paper tray.

Make sure you have all the components.

Connect the power cord

NOTE

DO NOT connect the USB cable yet (if you are

using a USB cable).

Connect the power cord.

NOTE

• The Warning LED on the control panel will stay

on until you have installed the ink cartridges.

• To prolong the life of the print head, provide the

best ink cartridge economy and maintain print

quality, we do not recommend unplugging the

machine frequently and/or leaving the machine

unplugged for extended periods of time. Each

time you plug the machine in, it automatically

cleans the print head, which uses some of your

ink.

We recommend using

machine. Using

the machine, resulting in periodic, but less

frequent, cleaning of the print head.

to power down the

allows minimal power to

Install the ink cartridges

CAUTION

If ink gets in your eyes, wash it out with water at

once and call a doctor if you are concerned.

NOTE

Make sure you install the Starter Ink Cartridges

included with your machine first.

Make sure that the power is turned on.

The LCD will show No Ink Cartridge.

Open the ink cartridge cover a.

Remove the orange protective part a.

NOTE

Do not throw away the orange protective part.

You will need it if you transport the machine.