Brother DCP-J752DW Quick Setup Manual - Page 21

Browse online or download pdf Quick Setup Manual for Printer Brother DCP-J752DW. Brother DCP-J752DW 31 pages. Printers
Also for Brother DCP-J752DW: Air Print Manual (12 pages), Quick Setup Manual (23 pages), Product Safety Manual (16 pages)

Print Page

For Wireless Network Users

The Authentication/Encryption methods used by the selected wireless access point/router are

not supported by your machine.

For infrastructure mode, change the authentication and encryption methods of the wireless

access point/router.

Your machine supports the following authentication methods:

Authentication method

WPA-Personal

WPA2-Personal

TS-04

Shared key

If your problem is not solved, the SSID or network settings you entered may be incorrect.

Reconfirm the wireless network settings.

See How can I find the wireless security information (SSID and Network Key*) on page 20 to

confirm.

For ad-hoc mode, change the authentication and encryption methods of your computer for

the wireless setting.

Your machine supports Open authentication method only, with optional WEP encryption.

The security information (SSID/Network Key) is incorrect.

Reconfirm the SSID and security information (Network Key).

If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother

TS-05

machine supports the use of the first WEP key only.

See How can I find the wireless security information (SSID and Network Key*) on page 20 to

confirm.

The wireless security information (Authentication method/Encryption method/Network Key) is

incorrect.

Reconfirm the wireless security information (Authentication method/Encryption method/

Network Key) in the table of TS-04.

TS-06

If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother

machine supports the use of the first WEP key only.

See How can I find the wireless security information (SSID and Network Key*) on page 20 to

confirm.

The machine cannot detect a wireless access point/router that has WPS or AOSS™ enabled.

If you would like to configure your wireless settings using WPS or AOSS™, you must operate

both your machine and the wireless access point/router.

Confirm your wireless access point/router supports WPS or AOSS™ and try starting again.

TS-07

If you do not know how to operate your wireless access point/router

using WPS or AOSS™ see the documentation provided with your

wireless access point/router, ask the manufacturer of your wireless

access point/router or ask your network administrator.

Two or more wireless access points that have WPS or AOSS™ enabled are detected.

- Confirm that only one wireless access point/router within range has the WPS or AOSS™

TS-08

method active and try again.

- Try starting again after a few minutes in order to avoid interference from other access

points.

Encryption method

Open

None (without encryption)

TKIP

AES

WEP