Brother DCP-L2550DW Quick Setup Manual

Browse online or download pdf Quick Setup Manual for Printer Brother DCP-L2550DW. Brother DCP-L2550DW 2 pages. Brief explanations for routine operations
Also for Brother DCP-L2550DW: Reference Manual (27 pages), Product Safety Manual (26 pages), Product Safety Manual (24 pages), Quick Setup Manual (2 pages), Quick Setup Manual (2 pages), Quick Setup Manual (2 pages), Manual (24 pages), Quick Setup Manual (2 pages)

Print Page

MFC-T910DW

Quick Setup Guide

Read the Product Safety Guide first, then read this Quick Setup Guide

for the correct installation procedure.

Unpack the machine and check the components

The components included in the box may differ depending on your country.

Remove the protective tape and film covering the machine and the ink tank cover.

Watch our FAQ Videos for help

with setting up your Brother

machine.

support.brother.com/videos

Load paper in the paper tray

For more information about paper handling and sizes, see the Reference Guide.

Pull the paper tray completely

out of the machine.

Connect the

power cord

Connect the power cord and the

machine powers on automatically.

Follow the prompts displayed on the

LCD to set the date and time.

Push down on the cap of the ink

Point the nozzle upward so

tank to close it tightly. Repeat step

that the ink does not spill,

for the three other ink tanks.

and then remove the nozzle

from the ink tank.

Close the ink tank cover. The

machine will prepare the ink tube

system for printing.

Select your

language (if needed)

Press Ajustes (Settings).

Press a or b to select the following:

Select [Conf. inicial](Initial Setup), and then

press OK.

Select [Sel. idioma](Local Language), and

then press OK.

Select your language, and then press OK.

Press Detener/Salir (Stop/Exit).

Starter Ink Bottles

Quick Setup Guide

• Black

Product Safety Guide

• Yellow

• Cyan

• Magenta

USB Interface Cable

(For some countries)

Open the output paper tray

cover a.

Fan the paper well and load it in the tray.

Fill the ink tanks with the starter ink

IMPORTANT

Check the ink bottle model name

on the label. Incorrect ink may

cause damage to the machine.

BK (Dye)

CMY

BT5000CMY

BTD60BK

BT5001CMY

BT5009CMY

DO NOT USE

Open the ink tank cover

BK (Pigment)

the tab

BT6000BK

cap of the ink tank.

BT6001BK

BT6009BK

Machine settings

When the machine has finished the initial cleaning

process, follow the steps on the LCD to configure the

machine settings.

• Check print quality

• Configure the tray settings

• Set Firmware Update Notice

• Print the installation sheet

Select the correct

Receive Mode

If you are not using your machine as a fax, go to

The correct Receive Mode is

determined by the external

devices and telephone subscriber

services (Voice Mail, Distinctive

Ring, etc.) you will be using on the

same line as the Brother machine.

For more information, see Choose

the Correct Receive Mode in the

Reference Guide.

The latest manuals are available at the Brother Solutions Center:

support.brother.com/manuals

Brother Installation Disc

Telephone Line Cord

Adjust the paper guides.

Remove the cap and protective

film from the ink bottle, and then

replace the cap.

and pull

NOTE

downwards to open the

Fasten the ink bottle cap tightly to

avoid leakage.

Connect the telephone line cord.

Use the jack marked LINE.

Press Ajustes (Settings).

Press a or b to select the

following:

Select [Fax], and then

press OK.

Select [Setup Receive],

and then press OK.

Select [Receive Mode],

and then press OK.

Select your Receive Mode,

and then press OK.

Press Detener/Salir (Stop/

Exit).

NOTE

• The Reference Guide for this model is available on the enclosed installation disc.

• Save all packing materials and the box in case you must ship your machine.

• You must purchase the correct interface cable for the interface you want to

use. A USB cable is included for some countries.

USB cable

We recommend using a USB 2.0 cable (Type A/B) that is no more than 6 feet

(2 meters) long.

Ethernet (Network) cable

Use a straight-through Category 5 (or greater) twisted-pair cable for 10BASE-T or

100BASE-TX Fast Ethernet Network.

NOTE

Pull out the paper support a, and unfold

the paper support flap b so that the

printed pages do not fall.

Close the output paper tray cover, and

then slowly push the tray completely

into the machine.

Remove the tip of the ink bottle.

Insert the nozzle of the ink bottle

firmly so that the ink does not

spill. Fill the ink tank by gently

squeezing the bottle as shown.

Empty the entire bottle into the

ink tank.

Connect the telephone line cord

If you are not using your machine as a fax, go to

NOTE

If you are sharing one telephone line with an external

telephone, connect it as shown below. Before you

connect the external telephone, remove the white

protective cap c from the EXT. jack of the machine.

Set your Station ID

If you are not using your machine as a fax, go to

Store your name and fax

Press Ajustes (Settings).

number so the machine prints it

Press a or b to select the following:

on all outgoing fax pages.

Select [Initial Setup],

For more information, see Enter

and then press OK.

Text on Your Brother Machine in

Select [Station ID],

the Online User's Guide.

and then press OK.

Select [Fax], and then

press OK.

Enter your fax number (up to 20 digits),

and then press OK.

Enter your name (up to 20 characters),

and then press OK.

Press Detener/Salir (Stop/Exit).

MEX/LTN-ENG

Version A

a. Extension telephone

b. External telephone

c. Protective cap