Brother GTX pro Reference Manual - Page 9

Browse online or download pdf Reference Manual for Printer Brother GTX pro. Brother GTX pro 13 pages. Garment printer
Also for Brother GTX pro: Quick User Manual (15 pages), User Manual (16 pages), Setup Manual (40 pages)

Print Page

1. Daily Maintenance

MAINTENANCE PARTS CLEANING & REPLACING PROCEDURES

WARNING

Simply remove the old Wiper Cleaner by lifting it up. Replace with a new one.

> After removing and replacing of the Flushing Foams, do NOT forget to clean the side holes of the receivers!

It is very critical to avoid clogging of the ink path to the waste tank!

> Always use this menu to perform cleanings or to replace parts

Maintenance

ERROR

In case of Warning/Error messages please follow the below procedures

MESH

FINE

Maintenance Part Clean/Replace

MAINTENANCE PARTS EXCHANGE

WIPER CLEANER REPLACEMENT

FLUSHING FOAM REPLACEMENT

Lift up the Flushing Receivers and

place them on cleaning paper to

avoid dripping ink.

Remove Flushing Foams and clean

the holes of the 2 grey receivers.

Install new Foams and put back the

receivers at their original location.

Clean also under the receivers place!

FAN FILTER REPLACEMENT

Extract the 2 filter holders from

the back of the machine.

Mount a new Fan Filter in each

black frames.

Coarse mesh surface in direction

of the inner side of the printer

and fine mesh surface in direction

of the outside of the printer.

COARSE

and follow instructions on the display