A-Link WNAP4G Quick Installaion Manual

Browse online or download pdf Quick Installaion Manual for Wireless Router A-Link WNAP4G. A-Link WNAP4G 6 pages. 4g mifi router
Also for A-Link WNAP4G: Quick Installation Manual (6 pages)

Print Page
More information, guides and updates can be found from Internet
Package includes:
- WNAP4G –router
- Power adapter
- Installation guide
- USB -cable
Connectors / Ports:
1.
SMA antenna connectors: Insert included antennas to these
connectors.
2.
USB port: Use this port to connect your 3G/4G modem or USB
mass storage for network sharing.
3.
WAN port: Connect your xDSL or cable modem to this port by
Ethernet cable.
4.
LAN port: Connect your PC to these ports by Ethernet cable.
5.
PWR connector: Insert provided power adapter to this connector.
Installation requirements:
-
Place the product to horizontal and flat base
-
Keep the product away from heating devices
-
Do not keep product in dusty or wet place
WNAP4G GIGABIT ROUTER

Quick Installation Guide

- 2x SMA -antenna
- CD (Manual)
- Network cable
http://www.a-link.com/uk/wnap4g
Front panel led's/functions:
1.
Reset button: You can use this button to reset factory
defaults. Press 10 seconds and factory defaults will be set to
the router.
2.
WPS button: You can additionally set your wireless network
security with WPS function if your PC wireless network
adapter supports WPS. Press this button 5 – 10 seconds when
WPS will be activated.
3.
Status USB:
ON = USB device connected
Flashing = data traffic on USB device
OFF and random flash = USB device is not connected
4.
WAN:
ON = WAN port connected
Flashing = data traffic on network (WAN)
OFF = WAN port is not connected
5.
WLAN:
OFF = Wireless network not activated
Flashing = Wireless network is activated and ready
Fast flashing = WPS PBC mode
6.
LAN 1 - 4:
ON = LAN port connected
Flashing = data traffic on network (LAN)
OFF = LAN port is not connected