LG 19CNT42K Owner's Manual - Page 31

Browse online or download pdf Owner's Manual for Monitor LG 19CNT42K. LG 19CNT42K 37 pages. Cloud monitor
Also for LG 19CNT42K: Owner's Manual (35 pages)

Print Page

Wired connection setting

Ethernet speed setting: Set the network

speed.

You can select Auto-Detect, 10Mbps,

100Mbps or 1000Mbps.

DHCP setting: Set the DHCP mode. If it is

set to On, an IP is automatically fetched from

a DHCP server and used.

Static connection setting: If DHCP is set to

Off, the input window is displayed for detailed

setting. Enter the IP Address, Subnet Mask,

Default Gateway and DNS Server fields and

then click the OK button.

USING CITRIX CLOUD MONITOR

Wireless setting (support planned to begin

in 2013)

The AP list for wireless network connection is

displayed. Click the Refresh button to update

the list of accessible APs.

Double click an AP or click the Connect but-

ton after selecting an AP to access the AP.

When the connection is established, the AP

is marked as connected in the list.

When you select a connected AP and then

click the right mouse button, the Disconnect

and Set-Up buttons are displayed. If you se-

lect an AP which is not connected and then

click the right mouse button, the Connect

button is displayed.