Fujitsu UTZ-PX1NBA Installation Manual - Page 5
Browse online or download pdf Installation Manual for Air Conditioner Fujitsu UTZ-PX1NBA. Fujitsu UTZ-PX1NBA 8 pages. Optional parts, drain pump unit
Print Page
1.5 to 2m gap (60 to 78 in.)
Supporter
VP25 or more
(O.D 32 mm
(1-1/4 in.))
Rise
PROHIBITED
Trap
Observe the following procedures to construct centralized
drain pipe fi ttings.
VP30 or more [O.D 38 mm (1-1/2 in.) or more]
7. ELECTRICAL WIRING
WARNING
Before starting work, check that power is not being supplied
indoor unit and outdoor unit.
1. Operation inside the control box
(1) Remove the control box cover.
Tapping screw
Locally ar-
ranged pipe
Air bleeding
Control box cover
(2) The position to insert the connector is different depending on
the indoor unit.
For wiring other than the drain pump unit, follow the Installation
manual of the indoor unit.
For U.S.A. and Canada
knockout hole
Drain pump wire
(Connector : Blue)
Conduit
(Power supply cable)
Lock nut
Grommet edging (Accessories)
Open the knockout hole, and then install a Grommet edging.
Pass the Drain pump wire through the hole.
For Others (Type 1)
Drain pump wire
(Connector : Blue)
Power supply cable
Cable tie (Medium)
(Accessories)
Grommet edging (Accessories)
Float switch
wire (Connec-
tor : Red)
b
Float switch
wire (Connec-
tor : Red)
b
En-5